Just a quick note to say how pleased I am with Master Gunsmith Bart Miller’s work on my Auto Ordnance m1 carbine.

What was wrong with it? Nothing. Except it looked brand new, right out of the box, which it was. I am a WWII reenactor and I wanted a rifle that looks like it’s “been there”. That’s where Bart came in. I’m not sure how he did it, but now it looks exactly like an original paratrooper carbine that I own. Outstanding! Now I will be using that carbine for parades, living history and static displays.

It’s one thing to be adept at repairing a firearm, which is smack dab in the middle of Bart’s wheelhouse. But it’s quite another thing to have the ability, talent and desire make a gun look authentic, like in my case.

What Bart has the ability to do is artistic, (he probably could make a handsome living in Hollywood), and Centennial Gun Club is extremely fortunate to have Mr. Miller on staff.

To borrow a line from The Terminator, “I’ll be back.”

Thank you for the great service today.  The 1 on 1 with your gunsmith was really valuable and Kyle McIntosh is nothing short of fantastic.  His customer service ethic, patience, skill and genuine caring about my needs really made a huge difference for me.  As a Vietnam veteran with disabilities I have challenges that he helped guide me through and I really appreciated it more then you know.  I am not an easy customer to please, and I am a very satisfied customer.   I will gladly tell any of your members and non-members to take advantage of this great new service. 

I cannot express how thankful I am for the work Bart did on repairing my dad old Winchester Model 70, 30-06. My dad had passed away in late 2020 after a hard-fought battle with cancer. His old Winchester was what my dad had taught me how to shoot with and had left it to me to pass down to my son. I cannot count the number of memories I have hunting with my dad, with his rifle by his side. His rifle was the one I used to harvest my first deer and my first elk.

A week after he passed away, a relative picked up his rifle and had taken it elk hunting. I had reservations about this, and I had offered the use of any of my personal rifles, including of the exact same model but they refused, saying that he had been looking forward to that hunt and had offered the use of his rifle as he knew it would most likely be his last hunting season.

When the rifle was finally returned, it was broken in half. It had been dropped and snapped at the wrist of the stock. I understand accidents happen, but the grief was almost unbearable as I was still mourning his death. I had taken the rifle to several gun smiths around town, and all of them had told me that the rifle was beyond repair, and I was better off turning it into wither a “wall hanger” or buying a new stock for it, but I couldn’t bring myself to go with either of those options.

Many of the memories I have hunting and shooting my dad and his rifle were etched in the character of that stock. From the wear on the finish from years carrying it in a scabbard while riding our horses through the mountains and hills we hunted to the scratches left behind on the wood while moving through heavy brush. He was excited that I would teach my son to hunt and shoot with that rifle as well as share with my son similar memories he had shared with me.

When I had taken the rifle to Bart and his team, they noted to me the severity of the damage and that there could be a risk of the rifle breaking again due to the recoil. Although Bart had made this clear, he was confident in their abilities to repair and conserve the rifle. On what would have been my dad’s 72nd birthday, six months after he passed away, I got a call from Bart asking me to come in and look at the work he had done to my dad’s rifle. I hurried to his shop and upon examining the rifle, I could not tell that it had ever been broken. The detail of the work Bart had done left the rifle looking as it was prior to it being broken. He completely conserved the rifle and thus all the memories I had shared with my dad. Even going as far as to fix the checkering that had been smashed during the impact of the fall that had caused the break. Every grain of wood is in place and all the character of the stock there. I cannot see with my naked eye any remnant of the break.

Bart’s work is solid and the rifle is completely functional, leaving me with zero worries about the pressure of the recoil causing the break to reappear. I cannot thank him and his team enough for the attention to detail and quality of work. The quality of craftsmanship is beyond anything I had ever expected.

Although my dad’s Winchester is priceless to me and I would have paid any amount to get it back to what is was prior to it being broken, the cost of the work was less than what I would have paid for a brand new stock. The care and attention to detail Bart had taken working on my dad’s rifle allows for the legacy of my dad and his rifle to live on and for me to share a lifetime of memories with my son.

Your man Jacy got my M17 rear sight fixed in no time! I cannot say enough about what a warm and expert guy he is. So glad to have this level of expertise available to us as members of CGC!

I wanted to tell you about my recent experience with selling two revolvers to you at the Centennial Gun Club. I had seen you “advertising” at the club and from emails that I had received. I had two revolvers that I did not use and did not want to keep so I brought them over to the club and spoke to Lucas. He explained to me in detail how the process worked and that he would need about 30 minutes to review the revolvers and obtain a price.

When I came back he had a price much higher than I had expected…which came as a very pleasant surprise. I agreed to the price and the transaction was very simple, quick and seamless. Your team handled all of the needed paperwork which was even better.

Thank you for a great experience. Should I have other firearms that I wish to sell I will not hesitate to use your service or recommend you to others who may be in the same situation.

Thanks again.

I have asked Bart and his team to replace the factory sights on a Springfield Armory XD(m) and two XD40 SCs with Trijicon HD sights. As defense pistols, I had wanted night sights with a wider rear notch and high visibility front post with an orange dot. The team completed the job swiftly and, in my range test today, the sights were spot on for windage and elevation. Now Bart has done a variety of superb gunsmithing jobs for me over the last several years; I am completely satisfied with his latest work.

I have taken a number of different firearms into to Bart and have received excellent advice, recommendations, and always superb workmanship by him and his team. He has replaced sights, glass-bedded three rifle actions for me, inspected service rifles and kept me successfully shooting across a range of disciplines for more than five years. Legacy Gunsmithing is my “Go-To” first stop for any firearms questions and I trust them completely. A hearty thanks and well-done for this recent job…it will certainly not be the last!

The term “elan” from the French language describes a property of elegant “vigorous spirit”, and the related English term “elance” describes a thrusting or hurling. Such terms well describe the recent 1911 build done by Bart and his staff at Legacy Gunsmithing, straight through the initial process of composition to the final product. Bart and his staff were straightforward in practical suggestions and with a vigorous hands-on build from scratch components, this sharpness of attention to detail resulted in the elegant behavior and fine function of the 1911 firearm.

Tactical components and a Damascus slide were solidified and tuned together over time with the final result represented as a functional tack driver with its own inherent spirit and balanced beauty. It is an exceptional end product from an exceptional staff.

What outstanding customer service the Centennial Gun Club provided me this week. I own an automatic that I carried when a police officer, but having changed careers haven’t fired in several decades. My wife used it for some firearms training and experienced consistent jamming. I brought it into your gunsmith shop – my first time visiting the facility. Steve provided a very welcoming/friendly greeting and asked how he could help. He listened very patiently. I was expecting to need to leave the weapon to be looked at over a period of time. Steve demonstrated a strong understanding of firearms and after looking it over asked if he could fire it to see what might be the problem. In a short time, he came back and advised the problem was not the firearm – but was the magazine. In a matter of minutes the problem was diagnosed and recommendations provided. WOW.

I was amazed and very grateful. As icing on the cake – Steve even thanked me for letting him shoot my sidearm!

What a great representative and knowledgeable staff you have. Two other gentlemen – whom I did not get their names – also weighed in and one did a modification of the magazine lips.

Thank you for having such a great team. I will certainly be sharing my experiences with your team to my friends.

Thank you for taking such good care of me and my Remington 11-87!  It is really nice to find a trustworthy gunsmith who is extremely knowledgeable about my firearms.  You immediately saw the missing O-ring [okay – it may have taken you 10 seconds . . . . ], diagnosed and fixed the problem, test-fired the gun, and returned it to me with a smile and a statement of “no charge”.  The gun has fired flawlessly since.  Thank you.  I will be back!

They don’t look down on or act condescending to women and new shooters. They want you to be safe and accurate. The training is great and they don’t make you feel stupid for asking questions. They are the only place I care to go. You’ll be happy that you went there too!

“What is really outstanding is the level of service provided; this shop is the only place I will entrust my guns to going forward. Bart and his staff are experts at their trade and true customer service experts as well. My hat is off to Bart and his shop!”

I brought this year old pistol into you all as it was double feeding and had worked flawlessly until it didn’t! I was concerned, as it was an expensive pistol and a long wait to get it. So, I was kinda bummed that it was having problems. Jacy put me at ease with his helpful and friendly manner and assured me that he could fix it and would have it to me one day later.

Sure enough, I got a call the next day and it was ready. I paid my $35, yes $35 and Jacy told me he modified the extractor/ejector and tidied it up. I test fired it and it worked flawlessly. My race gun was back on line!

I just wanted to take a minute to thank Jacy for his kindness, friendly manner and extreme competence. I am very impressed with your skill, service and professionalism. That goes for everyone I came in contact with at Legacy.

Today, Bart took my disassembled Ruger 22/45 and reassembled it while showing me how to put the hammer in the fired position in order to allow reassembly. He was patient, thorough in his explanation and very friendly.

Really wanted to give you all an attaboy and tell you how much I appreciate you and that Centennial has this service on site, it’s one of the reasons I belong. Thanks for your helpful, friendly and terrific service.

To Centennial Gun Club:

Just a note and a word of thanks to Mr. Bart Miller (Gunsmith). I would like to thank Mr. Miller for working so diligently on my match CZ pistols using his expertise and “magic.” He was very patience with me to get the pistols right for me. For the record, he did not replace with any aftermarket parts, just used the stock parts. I am guessing he just adjusts and polishes the parts to make the pistols just that much better.

My last match I won by seventeen hundreds of a second. I think his hard work for me paid off.

Once again, thank you so much.

I have used four Gunsmith’s over the past 40+ years, in three different locations in the U.S. Bart Miller is the best Gunsmith I have ever relied upon. Specifically, the quality of work, quick turn around time, superb skills and customer service, and reasonable costs, allow me to say Legacy Gun Smith is the best. We are fortunate to have Bart and his team at Centennial Gun Club. Most recently, I took a completely locked up pistol with a round in the chamber to Bart for advise, because I was certain I needed to return this new pistol to the manufacturer. Bart calmly took the pistol, and in about 10 minutes, presented me with a defective bullet, and thus a perfectly functioning pistol…free of charge. I have used Bart and his team for multiple upgrades and am totally satisfied with their level of perfection.

I had recently purchased a used gun from Centennial Gun club and it took out on the range last week. I was having trouble getting it to fire even when it went into battery. There was a usual issue with the firing pin and trigger assembly that needed some minor changes. I took it into the gunsmith. The team was very polite and professional. They took their time with me on the range that day trying to diagnose the problem. After just several days of trying it out on the range with the gunsmiths, they were able to fix the issue. The gun now works flawlessly! (I would like the thank gun smiths Kyle and Bart and anyone else who helped me) I would highly recommend this smith to anyone. The smiths there are extremely knowledgeable and friendly.

The best part is since I bought the gun there at their location everything was covered 100% under their guaranteed warranty.

Have been a customer of Legacy Gunsmithing for a few years and trust them completely with my firearms. Among other things, Bart and his team restored a cherished Browning Hi Power to magnificence.

More recently, I asked Bart to fit a barrel to my Rizzini/Sigarms Aurora shotgun. The gun is several years old and the replacement barrel was different enough to require significant fitting.

Bart did an amazing job. It locks up tight as a bank vault and ejects shells in a parallel arc. His work and attention to detail are both second to none. Fitting shotgun barrels seems to be a declining commodity, but Bart knows his craft.

I completely recommend Bart Miller and Legacy Gunsmithing for all types of repairs and projects, but particularly for those heirloom guns you want to be perfect.

I came into the Centennial Gun Club to see what they had for used handguns. This lead me to find a robust selection of used handguns and my purchasing one. I was torn between a standard Springfield XDS 9mm and a Mod 2 XDS 9mm with a Sig RomeoZero micro reflex sight. I decided on the standard XDS and took it home.

After a couple hours I started deciding that I wanted the Mod 2 with the reflex sight and decided I would return the next day and inquire about exchanging. Unsure what the staff would say, I entered and spoke to the Director of Gunsmithing and Used Guns, Bart Miller. He didn’t even think twice. He looked over the returning pistol and said okay, lets do it. WOW. I did not expect it to go that smooth.

He said they pride themselves in customer service and satisfaction and then proved it to me. On top of that, he even found a magazine in the back so I could walk out the door with two mags! Again, above and beyond! Thank you very much Bart. I will absolutely be back for more guns, ammo, range time and of course a membership with your store.

Thanks again for your help. I look forward to seeing you again and possibly working with you.

I wanted to thank you again for the fine work you did on my .375 H&H Magnum rifle. As the target below shows, this is a terrifically accurate and functional rifle. It will be with me in December when I hope to fill my Elk tag, using the same factory Federal Premium with 260 grain AccuBonds with which I sighted the rifle in. The group was shot from the bench at 100 yards.

This rifle began as a factory stock Remington 700 XCR II. I chose to replace the factory stock with a Bell & Carlson Medalist Sporter stock in Weatherby configuration, glass bed the barreled action into the bedding block, replace the X-Pro trigger with a Timney 510 trigger set to 3.5 lbs, and add optics. You did these modifications and suggested that I mount my scope with Leupold QR quick release bases and rings that you installed. I could not be more delighted with your work, advice, turnaround time and price. This is my go-to Elk rifle and will accompany me to Alaska when I go to fish and hunt. This is the third and latest rifle you’ve assembled and tuned for me and each shoots as well as this one…it will not be the last.

Thanks again for your craftsmanship, advice and help. It continues to be a pleasure to work with you.